Quotation Request Form

    We will use the information below to initially provide you with a guide specification and price.

    If all is acceptable at that point, we will produce a formal, no obligation quotation (and drawing if necessary) for you to check and give feedback on. If any amendments are required, these will be made, and the drawing will be resubmitted to you.

    If/when we arrive at a point where you can confirm that the quote and drawing both describe the exact unit that you require, with an adequate amount of detail and accuracy, then an order can be placed, and the manufacture can begin.

    1 CONTACT

    Name*
    Email*
    Telephone
    Company Name (If Applicable)

    2 INSIGHTS (Optional)

    Newark Cylinders specialises in bespoke solutions, so the more information you can provide us with regarding your specific circumstances, the easier it will be for us to guide you towards the right solution, whether that involves one of our products or not. We may be able to suggest alternative solutions, and/or other features which will solve your problems even more easily and/or cost-effectively.
    What problem(s) do you face, which has led you to inquire about a bespoke cylinder?
    How do you hope a bespoke cylinder would solve these problems?
    Are you considering any other solutions which may help you to solve these problems?
    Is there anything making it difficult to choose the best solution for your needs?

    3 VOLUME

    What volume do you require the unit to hold?*
    Litres

    4 RESTRICTIONS

    Are there any restrictions for what height and/or diameter the unit can have? (Including Insulation)

    If you need help measuring your existing cylinder accurately, please use our measurement calculator.

    5 TYPE

    What type of unit do you require?
    Other Type:

    6 PRESSURE

    Is the cylinder for a vented, unvented or pressurised system?

    7 MATERIAL

    Do you have a preference regarding the material the unit is manufactured from?

    8 SHELL PRESSURE

    Do you have any specific requirements regarding the maximum working head/ maximum working pressure of the unit’s shell?
    Please provide details:

    9 HEAT SOURCES

    What heat sources would you like the unit to be able to accept heat from?*
    Heat Pump Pressure:
    Solar Thermal Pressure:
    Controllable Boiler Pressure:
    Number of Immersion Heaters:
    Number of Solar PV Immersion Heaters:
    Other - Please Specify:

    11 DIRECT CONNECTIONS

    Do you require any direct flow and return connections (usually only required on Thermal Stores or Buffer Vessels)?*
    Connection Requirements:

    12 PURPOSE

    For what purposes will you be using the stored hot water in the unit?*
    Domestic Hot Water
    Heating
    Other - Please Specify

    13CONTROLS

    What size and quantity of control provisions would you like the unit to have?*
    Number of 10mm Stat Pockets
    10mm Stat Pocket Function
    Number of 15mm Stat Pockets
    15mm Stat Pocket Function
    Open Connection Size
    Open Connection Quantity
    Open Connection Function

    14INSULATION

    What (nominal) insulation thickness would you like the unit to have (please note that minimum thicknesses vary based on volume. If you select an inadequate thickness, we will quote for the next one up, assuming it is still within any overall dimensions requested in question 2)?
    Custom Insulation Thickness
    mm

    If you need help measuring your existing cylinder accurately, please use our measurement calculator.

    15 FINISH

    Which aesthetic finish would you like (examples of both can be seen on our homepage)?

    16 POSITIONS

    Will you require the unit’s connections to be in specific positions (no extra charge)?

    17 WATER SOURCE

    What water source will be used with this unit?
    Other - Please Specify:

    18 OTHER FEATURES

    Are there any other features that you need or feel would be helpful? If so, please specify

    19 FEEDBACK

    Did you find this form comprehensive enough, clear enough and easy enough to use?
    Please describe how we could improve this form

    20FILE UPLOAD

    If you have a photo of your existing cylinder or a diagram of what you require, you can upload it here for us to assist in our quote.

    * I agree to be contacted by Newark Cylinders as stated in their company's Privacy Policy. I understand that my data will be processed in accordance with the GDPR and will not be shared with third parties. Learn more.

    19 SUBMIT

    After submitting this form, we'll provide a quotation based off the information provided and aim to respond within 48 hours.

    Can't find what you're looking for? We're here to help.

    If you can't find what you're looking for please let us know your email and query and we'll be happy to help. 

    If you would like us to give you a call back, please provide your contact telephone and we will be in touch.

      *Required
      Name Email
      Telephone Message
      * I agree to be contacted by Newark Cylinders as stated in their company's Privacy Policy. I understand that my data will be processed in accordance with the GDPR and will not be shared with third parties. Learn more.